Specialized in PE, PVC, TPE, TPU and Low Smoke Zero Halogen (LSZH) wire and cable compound and materials.
In high-rise buildings, subway tunnels, new energy power stations and industrial complex scenarios, the fire safety of wires and cables is directly related to life and property and system reliability.
YINSU Flame Retardant Company provides customized flame retardant solutions for global customers, covering PE (polyethylene), PVC (polyvinyl chloride), TPE (thermoplastic elastomer), TPU (thermoplastic polyurethane) and LSZH (low smoke and halogen free) wire and cable systems to meet all safety requirements, ranging from UL94 V-0 flame retardant certification to EN 45545 fire protection for rail transportation and IEC 60754 low smoke and halogen free toxicity. All-round safety requirements.
Material Common Use Typical FR Type YINSU Flame Retardant Item No.
PE HDPE, LDPE, LLDPE, Red phosphorus, halogen free FR, PRP-950X, PE-XT-20, B-HFFR, MCA-B, WADP-10
Cross-linked PE cables, Bromine antimony masterbatch FR-ML-01, K100
Plastic insulated cables.
PVC PVC &Plastic insulated power cables, ATO alternatives T3, T30, FRP-950X, K100, ZHS, ZS, ZSB-A
Aluminum stranded wires, Zinc stannate
Prefabricated branch cables.
TPE Insulated wires, flexible cables Organic phosphorus MCA-B, WADP-10, FRP-950X, 95-MC
Shielded insulated cables
TPU Special purpose cables Organic phosphorus MCA-B, WADP-10, FRP-950X, 95-MC
Power cables for frequency converters.
Others Welcome to consult more details.
The processing window for PET is only 260–280 °C, whilst the decomposition temperature of ZDP is above 320 °C; the approximately 40 °C difference between them represents the total safety margin. In this paper, the material temperature and residence time are combined into a comparable figure expressed as ‘°C·min’, and the four stages—drying, melting, spinneret and storage—are identified to pinpoint where the safety margin is actually consumed.
The higher the flame-retardant PET content, the more difficult it is to achieve a V-0 rating; the root cause of this is often misunderstood: UL 94 V-0 prohibits the ignition of degreased cotton by dripping material, not the dripping itself. This article provides a sequence for adjusting the formulation based on three parameters—the size of the dripping material, its temperature and the duration of ignition—and presents the empirically determined diameter range (1.6–3.2 mm) at which ZDP achieves a V-0 rating with minimal dripping that does not ignite the material.
Flame retardancy in PET film faces three major challenges: difficulty in suppressing heat release, the conflict between melt droplets and charring, and the trade-off between transparency and flame retardancy. Yinsu Flame Retardants analyzes the factors contributing to PET’s flammability, the limitations of mainstream technical approaches, and potential breakthroughs in reactive flame retardants and synergistic systems.
PET Flame-Retardant Filament Spinning: Filament Breakage, Nozzle Clogging, and Decreased Tensile Strength? This article analyzes the core elements of flame-retardant masterbatch formulation design—Yiinsu flame retardant, selection of halogen-free and phosphorus-based flame retardants, synergist matching, and dispersion and antioxidant systems—and provides a formulation framework that balances spinnability and flame retardancy in PET spinning.